BS EN 1825-2_2002 油脂分离器 第2部分：标称尺寸、安装、操作和维护的选择
|
ID： |
A102869F2F7B446690B93B01CBA662D0 |
|
文件大小(MB)： |
0.22 |
|
页数： |
30 |
|
文件格式： |
|
|
日期： |
2009-10-29 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,1825-2:2002,Grease separators —,Part 2: Selection of nominal size,installation, operation and,maintenance,The European Standard EN 1825-2:2002 has the status of a,British Standard,ICS 13.060.99,NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW,BS EN 1825-2:2002,This British Standard, having,been prepared under the,direction of the Building and,Civil Engineering Sector Policy,and Strategy Committee, was,published under the authority,of the Standards Policy and,Strategy Committee on,29 March 2002,. BSI 29 March 2002,ISBN 0 580 38215 X,National foreword,This British Standard is the official English language version of,EN 1825-2:2002.,The UK participation in its preparation was entrusted to Technical Committee,B/505, Wastewater engineering, which has the responsibility to:,A list of organizations represented on this committee can be obtained on,request to its secretary.,Cross-references,The British Standards which implement international or European,publications referred to in this document may be found in the BSI Standards,Catalogue under the section entitled “International Standards Correspondence,Index”, or by using the “Find” facility of the BSI Standards Electronic,Catalogue.,A British Standard does not purport to include all the necessary provisions of,a contract. Users of British Standards are responsible for their correct,application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,— aid enquirers to understand the text;,— present to the responsible European committee any enquiries on the,interpretation, or proposals for change, and keep the UK interests,informed;,— monitor related international and European developments and,promulgate them in the UK.,Summary of pages,This document comprises a front cover, an inside front cover, the EN title page,pages 2 to 27 and a back cover.,The BSI copyright date displayed in this document indicates when the,document was last issued.,Amendments issued since publication,Amd. No. Date Comments,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 1825-2,February 2002,ICS 13.060.30,English version,Grease separators - Part 2: Selection of nominal size,installation, operation and maintenance,Installations de séparation de graisses - Partie 2: Choix des,tailles nominales, installation, service et entretien,Abscheideranlagen für Fette - Teil 2: Wahl der Nenngr鲞e,Einbau, Betrieb und Wartung,This European Standard was approved by CEN on 29 September 2001.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Management Centre or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official,versions.,CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2002 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 1825-2:2002 E,EN 1825-2:2002 (E),2,Contents,page,Foreword3,1 Scope .3,2 Normative references ..3,3 Terms and definitions..3,4 Application..4,5 Nominal size ..5,6 Selection of the nominal size5,6.1 General..5,6.2 Determination of the specific values ..5,6.2.1 Maximum flow rate of wastewater.5,6.2.2 Temperature factor ft6,6.2.3 Density factor fd..6,6.2.4 Detergent and rinsing agent factor fr .7,6.3 Special cases.7,6.4 Determination of sludge trap volume .7,7 Installation ..8,7.1 Limitations..8,7.2 Place of installation ..8,7.3 Drainage to and from the separator .8,7.4 Ventilation8,8 Operation, inspection and maintenance ..9,Annex A (normative) Calculation of maximum wastewater flow Qs.10,A.1 Calculation based on equipment/fittings discharging into the separator 10,A.1.1 General10,A.1.2 Maximum wastewater flow rate Qs 10,A.2 Method based upon the type of establishment discharging into the separator ..11,A.2.1 General11,A.2.2 Maximum wastewater flow rate Qs ……
……